Adjust the scan camera

Swap between device cameras

The scanner can be swapped between the device’s front and back facing camera using a button at the top-right.

Change the default camera

Which camera is opened by default can be adjusted from the device settings by a supervisor.

In kiosk mode, the supervisor must scan their badge. This will open a pop-up with a list of options. After selecting Device Settings, the default camera can be selected.

In supervisor mode, the supervisor can navigate to the settings from the bottom toolbar.

Focus the camera

Tapping the scanner screen will refocus the camera. When the camera is refocused, the inner square of the scanner will briefly display a yellow outline.